Select  an  area  of  interest:

Designing...  it isn't as simple as a normal airplane


Building...  easy if you don`t mind carving rotor blades


Flying...  things you need to be aware of


Miscellaneous...  necessary reading for the serious modeler



















Designing: Average Specifications / Parameters for Model Autogyros , all those angles and dangles...
Model Autogyro (flight capability) Calculations ,  what engine, and how heavy?
Model Autogyro Flight Prediction Chart , disk load versus flight capability..
Wind Tunnel Tests of R/C Model Autogyro Rotor Blades , Conducted by Bill Friedlander and Lester Garber..
The Stab-CG controversy Highlights from Ralph Taggart`s excellent article
Rotor Blade Tunnel Tests... A brief summary of the Les Garber/Bill Friedlander report.
Frequently Asked Questions
Suggestions for the Beginning Gyro Modeler
An excellent Delta Hub design
A simpler Delta hub design
Forum NotesSelected comments by Gyromodelers in the past years
from computer forums such as Prodigy, Compuserve, and RCOnline..  ( mostly  1993 thru 1996)
ATE-3 Autogyro airfoil   Jukka Tervamaki`s excellent full sized rotor craft blade airfoil


















Building: Frequently Asked Questions
Making simple, lightweight, and inexpensive wheels.
Suggestions for the Beginning Gyro Modeler
More Hints & Tips for building
Step-By-Step assembly of a relatively simple Autogyro
Balsa Dust and Rotor Blades.. The making of a simple balsa rotor blade....
Better yet,  here's an excellent source of pre-cut balsa Rotor Blades..
Forum NotesSelected comments by the original GyroNuts many years ago
taken from computer forums such as Prodigy, Compuserve, and RCOnline..  ( mostly  1993 thru 1996)
Can you solder music wire? Phil Harris & Bill Thamm say it can be done easier than we think...
















Flying: Flying a Model Autogyro , what`s so different about it?
Model Autogyro (flight capability) Calculations ,  what engine, and how heavy?
Model Autogyro Flight Prediction Chart , disk load versus flight capability..
Frequently Asked Questions
Suggestions for the Beginning Gyro Modeler
Forum Notes.Selected comments by Gyromodelers in the past years

from computer forums such as Prodigy, Compuserve, and RCOnline..  ( mostly  1993 thru 1996) Rotor Pre-rotation  How not to pre-rotate your rotor !
 Test flying the Huff & Puff pusher
"Flying the Wallis Autogyro" Comments from one who has "been there, done that"























Miscellaneous:
"Autogyros",   Aerodynamics, history, and development,  an essay by Jeff Lewis
** The above article is a must for those interested in the how's and why's of full sized Autogyros.**

Current Research... Day to day items being tested / experimented with Frequently Asked Questions
Glossary of Model Autogyro Terms ,  the GyroNut Dictionary..
Paul Stahlhuth`s "Virtual Gimbal" A proposal to minimize transfer of rotor disc loads and vibrations...
Paul Stahlhuth`s unique Interlocking Teeterbar rotor   An unusual approach to a rotor system...
Spindles and Gimbals!  An excellent article on the "offset gimbal"
which improved the stability of (full sized) autogyros, and applys to models as well.
Suggestions for the Beginning Gyro Modeler
Index of magazine articles by various GyroNuts
 Keyence Engager  GS III It`s not a gyro, but this is one neat rotorcraft worth looking at....


rev...02-27-03..jb