"Whistler"   ...a .25 to .35 Powered autogyro incorporating the use of a teeterbar.... Jim Baxter

• Designed by John Kallend
• Model requires at least a strong .25 or standard .35 two cycle,  or a good OS .26 four cycle.  Model here is powered by a .32 and is aerobatic.
• Plans are available thru RCModeler magazine, # 1116
• Has a 40" rotor disk, controlled by a teetering system, and is assisted by a short "winglet".
  
• This particular Whistler has a machined aluminum rotor head and teeterbar,   designed by John Kallend and machined by Bill Friedlander. ...
• Jim`s model is 4 years old,  has over 200 flights, and has been stripped and re-colored twice.
• Josh Harrel Models, used to kit this model, but is now out of business, thus the kit is no longer available.

rev..2-11-99..jb