John Boren's Indoor Gyro...

Here are some of the dimensions:

Power      GWS IPS A Drive with 10x8 Prop

Battery    Etec 2 Cell 1200 mAh

Receiver   GWS

Servos     MPI 50HP for Pitch and Roll Control

Weight     9 ounces

Length     24 inches from Prop to rear of stab

Rotor Dia.   29.6 inches

Blade        Flat bottom Balsa with a 1.75 inch cord.    A small weight is added at tip.

As the attached photo shows the head design was taken from others and is of the Delta Type.     


I've attached a photo of when it was first built since I don't have any newer picture since the updates.



The only thing different now is the fact that I have widened the landing gear, Switch to a duel IPS motor and upgraded the battery to a 2 cell 1200 Etech.



All of the flying surfaces are the same.







http://www.aerocompositedesign.com/Videos/Electric_Gyro/electric_gyro.html
rev... 7-04.. JB